Atomic Emission

Emission Home

Atomic Spectroscopy

Elemental Analysers

ALLIANCE Service

Request Service

Training Courses

Shows

Seminars & User Club

Application Notes

Downloads

Request Information

-------------------------

International Links

Presentazione della società

Informazioni Legali

Offerte di impiego

 Emissione Application Notes

• Quick Identification of a Defect
• Thermal Treatment on Steel
• Carburizing
• Bulk Analysis - Cast Iron
• Hard Coatings
• Diffusion Studies
• Zinc Coatings
• Thick Anodic Aluminum
• Automotive Applications
• Analysis of Car Bodies
• Analysis of Cataphoresis
• Speciation of Chromium with Glow Discharge
• Diamond Like Carbon (DLC) Analysis
• Enamel on Ceramics
• Characterisation of Glass Surfaces and Coatings on Glasses
• Depth Profile of a Pre-Painted Steel Sheet
• Thin Alumina Films
• Rubber Layer on Stainless Steel using Pulse RF
• Electrical Coatings
• Quantitative Analysis of BPSG on Silicon
• Analysis of Multilayer Structures on Silicon
• Analysis of a Hard Disk
• Analysis of Hydrogen
• Analysis of Powders
• Analysis of Small Samples
• JY IMAGE - Use in Glow Discharge
• 23. Practical comparisons between Glow Discharge and SIMS
• 25. Practical comparisons between Glow Discharge-OES and Glow Discharge-MS
• 26. Surface and Thin Film Analysis Methods

• 00. List of Available Application Notes
• 01. Analysis of 10% NaOH and 10% NaCl
• 02. ICP Figures of Merit
• 03. Evaluation, Control, and Diagnosis of ICP through Simple Experiments
• 04. Analysis of 95% Methanol
• 05. The Determination of Pt for Cancer Studies
• 06. Quantitative Analysis of Soil Extracts with ICP-OES
• 07. Analysis of Naptha
• 08. Fast Elemental Determination of Environmental Samples with ICP-OES
• 09. Analysis of Several Elements in a Copper Matrix
• 10. Analysis of Chlorine, Bromine and Iodine in water using ICP-OES
• 11. Long Term Stability Test for 19 Elemental Wavelengths
• 12. Analysis in Geology - 1% HF and 4 g/L Boric Acid, 10g/L Lithium Metaborate and 10g/L Lithium Tetraborate
• 13. Comparison of the Hydride Generator to the Concomitant Metals Analyser (CMA)
• 14. Analysis of a Vitamin Mineral
• 15. Determination of Boron in Steel by On-Line Matrix Simplification
• 16. Analysis of Metals in 100 g/L Copper Acetate
• 17. Analysis of Metals in 30 g/L Barium Nitrate
• 18. Analysis of Metals in 200 g/L Strontium Nitrate
• 19. Analysis of Metals in 200 g/L Strontium Hydroxide
• 20. Analysis of Glass Samples
• 21. Analysis of 10 g/L Lead
• 22. Determination of Ni and V in Bitumen by Simple Sample Preparation by Emulsion
• 23. Analysis of Dialysis
• 24. Analysis of Dust Samples
• 25. Very Rapid Analysis of Supply Water, Sludge From Purification Station and Animal Food
• 26. Determination of 14 Trace Elements in Stainless Steel
• 27. Stability Test on Calcium in Cement
• 28. Analysis of Quartz Filters
• 29. Analysis of Lubricating Oils
• 30. Major Elements in Cement Analysis by ICP
• 31. Limits of Detection Obtained by ICP-OES in 10 g/L Rhodium
• 32. Analysis of Beer
• 33. Determination of Elements in Glycerin and Gamma-Butyrolacetone
• 34. Analysis of Silver Dopants and Impurities
• 35. Waste Water and Soil Analysis
• 36. ILM05 CLP Analysis using a Fast Sequential (ULTIMA 2) and High-Throughput Combination Simultaneous/Sequential (ULTIMA 2CE) ICP-OES
• 37. Repeatability of Traces and Major Elements in Water
• 38. Application of ICP to the Analysis of Food and Agriculture
• 39. Analysis of Samples Related to Nuclear Submarine Operation
• 40. Detection Limits in Water using Assorted Sample Introduction Systems
• 41. Interest of a Semi-Quantitative Method for Geological Samples
• 42. Analysis of Major Elements in Glass Samples with a Sequential ICP-OES
• 43. Analysis of Incineration Solvents
• 44. Analysis of Nickel Base Samples
  

• 17. Measurement of Carbon and Sulfur in Copper
• 18. Measurement of Carbon in Ferrosilicon
• 19. Measurement of Carbon and Sulfur in Titanium Oxide
• 20. Measurement of Sulfur in Rubber
• 23. Carbon Analysis: Organic and Inorganic Carbon in Soils
• 24. Measurement of Carbon and Sulphur in Cement
• 25. Hydrogen Analysis in Steel and Metals: Solid Extraction or Fusion
• 26. Modular Automation for C/S, O/N and H
• 27. Hydrogen Analysis of Solid Samples
• 28. Quality Assurance for the Analysis of Steel by Gas Component Analysis
• 29. Sample Preparation and Sampling Methods for the Gas Analysis of Steel